EBMP

BIMETALLIC PLATE

TRANSITION PLATE

VIEW PDF

Issue No. 3 EBMP
Issue Dt. 02.01.15
Doc. Rev. No. 0
Doc. Rev. Dt.
MATERIAL OF BIMETALLIC  = ELECTROLYTIC GRADE COPPER (MIN.99.9%) & ELECTROLYTIC GRADE ALUMINIUM (MIN.99.5%) BY VOLUME 1:4 MOLECULAR BONDED.
H C W
H1=11Ø C1=25.0 C5=50.0 W00=38
H2=14Ø C2=32.0 C6=55 W0=50
H3=18Ø C2A=34.0 C7=OBLONG SLOT TO SUIT C3,C4,C5- PLATE SIZE 80X80 W1=80
C3=40.0 W2=100
C4=44.5 C8=OBLONG SLOT TO SUIT C3,C4,C5,C6- PLATE SIZE 100X100 W3=120
CATALOG NO. FIG.NO. DIMENSIONS-mm.
W L
EBMP-2 I 38 60
EBMP-4 I 50 60
EBMP-6 II 50 50
EBMP-8 II 60 60
EBMP-10 II 75 75
EBMP-12 II 80 80
EBMP-14 II 100 100
EBMP-16 II 120 120

NOTE :
1)PLEASE ADD SUFFIX H1, H2, H3 AS REQUIRED FOR DIAMETER OF 2/4 HOLES H DIA. IN THE PLATE AND ADD SUFFIX C1,C2—-C7,C8 AS REQUIRED FOR CENTRE TO CENTRE DISTANCE C OF 2/4 HOLE IN THE PLATE. FORe.g. CATALOG NO. OFPLATE SIZE 38mm.WIDTH AND 60mm.LONG WITH 14mm. HOLE DIA AND CENTRE TO CENTRE DISTANCE 50.0mm. IS EBMP-2_H2_C5

2)CUSTOM MADE PLATE IS OBTAINED IN THE FOLLOWING CATALOG NO.FORMAT. EBMP-XXXW_XXXL_XX(HOLE DIA.)_XX( HOLE CENTRE)_N. WHERE PREFIX XXX TO W IS THE PLATE WIDTH IN mm. AND PREFIX XXX TO L IS THE PLATE LENGTH IN mm. N= NO. OF HOLES FOR e.g. CATALOG NO. OF PLATE 105 mm.WIDTH 45 mm.LONG WITH 2 HOLES 14mm. HOLE DIA., HOLE CENTRE 33mm. WITH 2 HOLES IS EBMP-105W_045L_H2_33_2.

3) PLATE OF HIGHER THICKNESS T=2mm., 3mm., 4mm. IS OBTAINED BY ADDING SUFFIX TO THE CATALOG TYPE. FOR e.g. CATALOG NO. OF PLATE 2mm.THICK FOR CATALOG TYPE EBMP-12- IS EBMP2-12.