EAFTF

ALUMINIUM EXPANSION TERMINAL

TUBE TO FLAT

VIEW PDF

Issue No. 3 EATFT
Issue Dt. 02.01.15
Doc. Rev. No. 0
Doc. Rev. Dt.
MATERIAL OF EXPANSION TERMINAL = ALUMINUM ALLOY GRADE 4600 CONFORMING IS 617-1994 (LM-6). MATERIAL OF NUT, BOLT, PLAIN WASHER – MILD STEEL HOT DIP GALVANISED. SPRING WASHER SPRING STEEL ELECTRO GALVANISED.
TERMINAL SUITABLE FOR ≤ 145KV
H C W
H1=11Ø C1=25.0 C4=44.5 W1=80
H2=14Ø C2=32.0 C5=50.0 W2=100
H3=18Ø C3=40.0 C6=CUSTOM MADE W3=120
C7=40,44.5,50(OBLONG SLOT) W4=CUSTOM MADE

C8=40, 44.5, 50, 55, 60 (OBLONG SLOT)

 
CATALOG NO. FIG. NO. ALUMINIUM TUBE SIZE  TUBE DIA. DIMENSIONS-mm.
IPS L Y T X J
EAFTF-2 I,III 1.00" 33.40 230 108 12 158 10
EAFTF-4 I,III 1.25" 42.16 230 116 12 158 10
EAFTF-6 I,III 1.50" 48.26 230 116 12 158 10
EAFTF-8 I,III 2.00" 60.30 230 128 12 158 10
EAFTF-10 I,III 2.50" 73.03 230 140 12 158 10
EAFTF-12 I,III 3.00" 88.90 230 158 12 158 10
EAFTF-14 II,III 3.50" 101.60 240 168 12 158 12
EAFTF-16 II,III 4.00" 114.30 240 184 12 158 12

NOTE:
1) PLEASE ADD SUFFIX H1, H2, H3 AS REQUIRED FOR DIAMETER OF 4 HOLES H DIA. IN THE TERMINAL FOR e.g. CATALOG NO. OF TERMINAL FOR TUBE DIA. 60.30mm. WITH 14 mm.HOLE DIA IS EAFTF-8_H2

2) PLEASE ADD SUFFIX C1,C2—-C7 AS REQUIRED FOR CENTRE TO CENTRE DISTANCE OF 4 HOLES IN THE TERMINAL PAD. IN CASE OF CUSTOM MADE, PLEASE SPECIFY NUMERICAL VALUE FOR e.g.
FOR STANDARD ITEMS:
CATALOG NO. OF TERMINAL FOR TUBE DIA.60.30mm. WITH 14mm.HOLE DIA. HOLE TO HOLE CENTRE 50mm. IS EAFTF-8_H2_C5

FOR CUSTOM MADE ITEMS:
CATALOG NO. OF TERMINAL FOR TUBE DIA.60.30mm. WITH 14mm. HOLE DIA. HOLE TO HOLE CENTRE 42mm. IS EAFTF-8_H2_42

3) PLEASE ADD SUFFIX W1, W2–W4 AS REQUIRED FOR WIDTH OF TERMINAL. e.g. CATALOG NO. OF TERMINAL FOR TUBE DIA.60.30mm. WITH 14mm. HOLE DIA. HOLE TO HOLE CENTRE 50mm.TERMINAL WIDTH 80mm. IS EAFTF-8_H2_C5_W1.

4) FOR NOMINAL TUBE SIZE > 38mm. O.D., 40mm. O.D., 50mm. O.D., 60mm. O.D., 80mm. O.D., 100mm. O.D., 120mm. O.D. ETC. PLEASE ADD SUITABLE SUFFIX TO THE CATALOG TYPE e.g. CATALOG NO. OF EXPANSION TERMINAL CONNECTOR SUITABLE FOR 80 mm. O.D. ALUMINIUM TUBE IS EAFTF-80.

5) VALUES IN THE CATALOG IS SUITABLE FOR W=80mm. VALUES WILL DIFFER IF W CHANGES.

6) FOUR HOLES DIA.14mm. FOR HOLE CENTRES C3=40 mm.,C4=44.5 mm.,C5=50 mm.WITHDRAWN FOUR OBLONG SLOTS WITH COMMON CENTRE C7 INTRODUCED FOR TERMINAL PAD WIDTH W1=80mm. PLEASE REFER FIG.III

7) TO SPECIFY USE OF BIMETALLIC PLATE, ADD SUFFIX BM AS REQUIRED. e.g. CATALOG NO. OF TERMINAL FOR TUBE DIA. 60.30mm. WITH 14 mm.HOLE DIA.IS EAFTF-8_H2_BM

8) PLEASE ADD SUFFIX SS FOR CLAMPS WITH STAINLESS STEEL NUT BOLTS EXAMPLE CATALOG NO.OF TUBE DIA.60.30mm. WITH 14mm.HOLE DIA. HOLE TO HOLE CENTRE 50mm. TERMINAL WIDTH 80mm. IS EAFTF-8_H2_C5_W1_SS.

9) PAD MOUNTING HARDWARE IS OBTAINED FROM CATALOG TYPES EHBG, EHNG, EHFG, EHWG FOR GALVANISED SCREWING HARDWARES AND EHBS, EHNS, EHFS, EHWS FOR STAINLESS STEEL SCREWING HARDWARES.