EARTF

ALUMINIUM FLAT TERMINAL

TUBE TO FLAT

VIEW PDF

Issue No. 5 EARTF
Issue Dt. 2022.04.02
Doc. Rev. No. 0
Doc. Rev. Dt.
MATERIAL OF TERMINAL = ALUMINUM ALLOY GRADE 4600 CONFORMING IS 617-1994 (LM-6). MATERIAL OF NUT, BOLT, PLAIN WASHER – MILD STEEL HOT DIP GALVANISED. SPRING WASHER SPRING STEEL ELECTRO GALVANISED.
TERMINAL SUITABLE FOR ≤ 245KV
H C W Ø
H1=11Ø C1=25.0 C4=44.5 W1=80 Ø1=45°
H2=14Ø C2=32.0 C5=50.0 W2=100 Ø2=90°
H3=18Ø C3=40.0 C6=55.0 W3=120 Ø3=30°
CATALOG NO. FIG. TYPE ALUMINIUM TUBE SIZE TUBE DIA. DIMENSIONS-mm.
IPS L Y T X J
EARTF-2 B 1.00″ 33.40 170 84 12 130 10
EARTF-4 B 1.25″ 42.16 170 94 12 130 10
EARTF-6 B 1.50″ 48.26 172 94 12 132 10
EARTF-8 A 2.00″ 60.30 155 128 12 115 10
EARTF-10 A 2.50″ 73.03 155 140 12 115 10
EARTF-12 A 3.00″ 88.90 175 158 14 135 10
EARTF-14 A 3.50″ 101.60 185 168 14 145 12
EARTF-16 A 4.00″ 114.30 200 184 20 160 12
EARTF-18 A 4.50″ 127.00 205 210 25 165 12
EARTF-20 A 5.00″ 141.30 225 222 30 185 12
EARTF-22 A 6.00″ 168.00 230 248 18 180 12

NOTE:
1)PLEASE ADD SUFFIX H1, H2, H3 AS REQUIRED FOR DIAMETER OF 4 HOLES H DIA. IN THE TERMINAL FORe.g. CATALOG NO. OF TERMINAL FOR TUBE DIA. 60.30mm. WITH 14mm. HOLE DIA IS EARTF-8_H2.

2)PLEASE ADD SUFFIX C1,C2—-C6 AS REQUIRED FOR CENTRE TO CENTRE DISTANCE OF 4 HOLE IN THE TERMINAL PAD. FOR e.g. CATALOG NO. OF TERMINAL FOR TUBE DIA.60.30mm. WITH 14mm.HOLE DIA. HOLE TO HOLE CENTRE 50mm. IS EARTF-8_H2_C5.

3)PLEASE ADD SUFFIX W1, W2, W3 AS REQUIRED FOR WIDTH OF TERMINAL. FOR e.g. CATALOG NO. OF TERMINAL FOR TUBE DIA. 60.30mm. WITH 14mm. HOLE DIA. HOLE TO HOLE CENTRE 50mm.TERMINAL WIDTH 80mm. IS EARTF-8_H2_C5_W1.

4) FOR NOMINAL TUBE SIZE > 38mm.O.D., 40mm.O.D., 50mm.O.D., 60mm.O.D., 80mm.O.D., 100mm.O.D., 120mm.O.D. ETC. PLEASE ADD SUITABLE SUFFIX TO THE CATALOG TYPE e.g. CATALOG NO. OF TERMINAL CONNECTOR SUITABLE FOR 80mm. OD ALUMINIUM TUBE IS EARTF-80.

5) CENTRE PAD MAY BE OBTAINED BY ADDING SUFFIX CP FOR e.g. CATALOG NO. OF 2.00″ IPS ALUMINIUM TUBE WITH CENTRE PAD IS EARTF-8_HX_CX_CP.

6) ANGLE CONNECTORS MAY BE OBTAINED BY SPECIFYING DESIRED ANGLE ANDCONTACT SURFACE AS ILLUSTRATED. ADD CONTACT SURFACE LETTER AND REQUIRED ANGLE TO CATALOG NUMBER. FOR e.g. CATALOG NO. OF 2.00″ IPS ANGLE CONNECTOR WITH CONTACT SURFACE REQUIRED ON SIDE N ANGLE 90 DEGREE IS EARTF-8_HX_CX_N90.

7) VALUES IN THE CATALOG IS SUITABLE FOR W=80mm. VALUES WILL DIFFER IF W CHANGES.

8) PLEASE ADD SUFFIX SS FOR CLAMPS WITH STAINLESS STEEL NUT BOLTS FOR e.g.CATALOG NO.OF TERMINAL FOR 5.00″ IPS TUBE TO PAD WITH STAINLESS STEEL NUT BOLTS IS EARTF-20_HX_CX_SS.

9) PAD MOUNTING HARDWARE IS OBTAINED FROM CATALOGTYPES EHBG, EHNG, EHFG, EHWGFOR GALVANISED SCREWING HARDWARES. AND EHBS, EHNS, EHFS, EHWSFOR STAINLESS STEEL SCREWING HARDWARES.