EACF
| Issue No. | 5 | EACF |
| Issue Dt. | 2022.04.02 | |
| Doc. Rev. No. | 0 | |
| Doc. Rev. Dt. | – | |
| MATERIAL OF TERMINAL = ALUMINUM ALLOY GRADE 4600 CONFORMING IS 617-1994 (LM-6). MATERIAL OF NUT, BOLT, PLAIN WASHER – MILD STEEL HOT DIP GALVANISED. SPRING WASHER SPRING STEEL ELECTRO GALVANISED. | ||
| TERMINAL SUITABLE FOR ≤ 245kV | ||
|
H |
C |
W |
Ø |
|
|
H1=11Ø |
C1=25.0 C2=32.0 C3=40.0 C4=44.5 C5=50.0 |
C6=55.0 C7=40.0,44.5,50.0 C8=40.0,44.5,50.0,55.0 (OBLONG SLOTS) C9=CUSTOM MADE |
W1=80 W2=100 W3=120 W4=CUSTOM MADE |
Ø1=45° |
|
CATALOG |
TYPE |
CONDUCTOR RANGE |
DIMENSIONS-mm. |
||||
|
AA Ø mm. |
L |
X |
T |
Y |
J |
||
| EACF-6 |
II,III |
10.00 — 16.00 |
150 |
110 |
12 |
60 |
10 |
| EACF-7 |
I,III |
16.00 — 18.05 |
150 |
110 |
12 |
60 |
10 |
| EACF-9 |
I,III |
18.00 — 22.26 |
150 |
110 |
12 |
60 |
10 |
| EACF-11B |
I, IV |
22.00 — 26.00 |
150 |
110 |
12 |
74 |
10 |
| EACF-11C |
I, IV |
26.00 — 28.13 |
150 |
110 |
12 |
74 |
10 |
| EACF-13B |
I, IV |
28.00 — 30.15 |
150 |
110 |
12 |
74 |
10 |
| EACF-13C |
I, IV |
30.00 — 32.00 |
150 |
110 |
12 |
74 |
10 |
| EACF-15B |
I, IV |
32.00 — 34.00 |
170 |
130 |
14 |
84 |
10 |
| EACF-15C |
I, IV |
34.00 — 37.00 |
170 |
130 |
14 |
84 |
10 |
|
EACF-15D |
I,IV |
37.00 — 40.00 |
170 |
130 |
14 |
84 |
10 |
|
EACF-16B |
I,IV |
40.00 — 43.00 |
170 |
130 |
16 |
94 |
10 |
|
EACF-16C |
I |
43.00 — 46.63 |
170 |
130 |
16 |
94 |
10 |
NOTE:
1)PLEASE ADD SUFFIX H1, H2, H3 AS REQUIRED FOR DIAMETER OF 4 HOLES H DIA. IN THE TERMINAL FOR e.g. CATALOG NO. OF TERMINAL FOR CONDUCTOR DIA.10.0 TO 16.0 mm. WITH 14 mm HOLE DIA IS EACF-6_H2
2)PLEASE ADD SUFFIX C1,C2—-C9 AS REQUIRED FOR CENTRE TO CENTRE DISTANCE OF 4 HOLE IN THE TERMINAL PAD. IN CASE OF CUSTOM MADE PLEASE SPECIFY NUMERICAL VALUE FOR e.g.
FOR STANDARD ITEMS :
CATALOG NO. OF TERMINAL FOR CONDUCTOR DIA. 10.0 TO 16.0 mm WITH 14mm HOLE DIA. HOLE TO HOLE CENTRE 50mm. IS EACF-6_H2_C5
FOR CUSTOM MADE ITEMS :
CATALOG NO. OF TERMINAL FOR CONDUCTOR DIA. 10.0 TO 16.0 mm WITH 14mm HOLE DIA. HOLE TO HOLE CENTRE 42mm IS EACF-6_H2_42
3)PLEASE ADD SUFFIX W1, W2–W4 AS REQUIRED FOR WIDTH OF TERMINAL. e.g. CATALOG NO. OF TERMINAL FOR CONDUCTOR DIA. 10.0 TO 16.0 mm WITH 14mm HOLE DIA. HOLE TO HOLE CENTRE 50mm.TERMINAL WIDTH 80mm. IS EACF-6_H2_C5_W1
4)ANGLE CONNECTORS MAY BE OBTAINED BY SPECIFYING DESIRED ANGLE AND CONTACT SURFACE AS ILLUSTRATED. ADD CONTACT SURFACE LETTER AND REQUIRED ANGLE TYPE e.g. CATALOG NO. OF TERMINAL FOR CONDUCTOR DIA. 10.0 TO 16.0 mm WITH 14mm HOLE DIA. HOLE TO HOLE CENTRE 50mm.TERMINAL WIDTH 80mm. CONDUCTOR TAKEOFF ANGLE 45° IS EACF-6_H2_C5_W1_XØ1.
5)VALUES IN THE CATALOG IS SUITABLE FOR W=80mm VALUES WILL DIFFER IF W CHANGES.
6)PLEASE ADD SUFFIX SS FOR CLAMPS WITH STAINLESS STEEL NUT BOLTS e.g. CATALOG NO. OF TERMINAL FOR CONDUCTOR DIA. 10.0 TO 16.0 mm WITH 14mm HOLE DIA. HOLE TO HOLE CENTRE 50mm.TERMINAL WIDTH 80mm. WITH STAINLESS STEEL NUT BOLTS IS EACF 6_H2_C5_W1_SS
7)PAD MOUNTING HARDWARE IS OBTAINED FROM CATALOG TYPES EHBG, EHNG, EHFG, EHWG FOR GALVANISED SCREWING HARDWARES.AND EHBS, EHNS, EHCNS,EHFS, EHWS FOR STAINLESS STEEL SCREWING HARDWARES.